Difference between revisions of "Centaur"

From Westerly Wiki
Jump to: navigation, search
(References)
(Maintenance, Repair and Upgrades)
(24 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
==Introduction==
 
==Introduction==
First shown at the 1969 London Boat Show the Centaur production run reached 2,440 before the design was evolved into the Griffon in 1980. A variety of engines were origianally fitted with the 23HP Volvo MDIIB and MDIIC being the most popular.
+
First shown at the 1969 London Boat Show the Centaur production run reached 2,440 before the design was replaced by the Griffon in 1980. A variety of engines were origianally fitted with the 23HP Volvo MDIIB and MDIIC being the most popular.
 +
 
 
== Centaur Statistics ==
 
== Centaur Statistics ==
  
Line 50: Line 51:
 
|Number Built:||  2444
 
|Number Built:||  2444
 
|}
 
|}
 +
 +
 +
Westerly Centaur Brochure here: [[Westerly Brochures]]
 +
 +
 +
Thinking of buying a Centaur ? Find all you need to know here: [http://www.westerly-owners.co.uk/westerlywiki/images/f/f6/CENTAUR_PURCHASE_ADVICE.pdf Paul Shave's article Buying a Centaur]
 +
  
 
== The Centaur Definitive Guide==
 
== The Centaur Definitive Guide==
[http://www.westerly-owners.co.uk/guides_6.php A definitive guide to the Centaur Story can be found on the Westerly Owners Association website here]
+
 
 +
(First published in WOA magazine No. 51, Winter 1993)
 +
 
 +
Dennis Rayner’s designs had launched Westerly as a successful company, but by 1967 it was felt that fresh ideas were needed for a new range for the 1970’s. Jack Giles of Laurent Giles had recently launched "Bluebird of Thorne", a 50 foot twin keeler, for which he had done extensive tank testings. The tank testings decided it; he was the man to approach for state of the art twin keel designs.
 +
 
 +
The first effort was a bit of a disaster, since Laurent Giles had come up with what amounted to a development of the existing Westerly 25, which David Sanders thought was "all curves and no substance." David Sanders was very disappointed and said so to Jack Giles who immediately perked up and said "so you want a proper yacht?"
 +
 
 +
At this stage I can do no better than to produce the words of Jack Giles from his press release of March 1969:
 +
 
 +
''Westerly Centaur''
 +
L.0.A.: 26ft.
 +
L.W.L.: 21ft. 4ins.
 +
Beam: 8ft. 5ins.
 +
Draft: 3ft.
 +
Working sail area: 341sq ft.
 +
T.M.: 6 tons
 +
Designers: Laurent Giles & Partners Ltd.
 +
Builders: Westerly Marine Constructions Ltd.
 +
 
 +
 
 +
''To be commissioned to design for Westerly Marine was indeed a challenge. With the resources of their own Research Department allied to a highly developed production line and a keen Buying Office there seemed to be a danger of too many outside pressures working on the Designers.''
 +
 
 +
''In practice we found that this was not so, providing trouble was taken to appreciate and allot priorities to the requirements of the various departments concerned and provided we were prepared to work within a reasonable, but tight, time table.''
 +
 
 +
''The first result of this co-operation, the "Centaur", has a very low waterline over beam coefficient, a clean canoe body and twin bilge keels of aero-foil section.''
 +
 
 +
''The power installation has its propeller working in clear water and the balanced skegiess spade rudder provides ample control under sail or power.''
 +
 
 +
''Under sail the boat performs remarkably well to windward at a very modest angle of heel and under power did all that was expected of her and, in addition, showed unusually good handling characteristics when going astern.''
 +
 
 +
''The layout below decks is spacious for a boat of only 26 ft, overall having four comfortable 6ft. 6in. berths, a separate toilet compartment and a dinette arrangement which can be converted into an additional double bunk. Despite the space below decks, there is still a 6ft. 6in. self-draining cockpit, a feature of the boat which has appealed to the American market to which an appreciable number of "Centaurs" have already been exported. 20.3.69
 +
''
 +
 
 +
The Centaur was officially launched at the London Boat Show 1969, and was an immediate hit worldwide, as can be seen from the press release. She was, and is, the perfect family yacht for all the reasons that Jack Giles outlined, but also because she was reasonably priced, and thoroughly well made. On the subject of maintenance and value, it is particularly important to have a steady replacement programme for any yacht so that her equipment, such as sprayhood, sails and instrumentation, is not dreadfully out of date or simply "clapped out." On the other hand, it is important to guard against the thought that spending £2,500 on vertical roller reefing will add significantly to the boat’s value.
  
 
==Maintenance, Repair and Upgrades==
 
==Maintenance, Repair and Upgrades==
Line 58: Line 99:
  
 
[[Centaur Sink]]
 
[[Centaur Sink]]
 +
 +
[[Media:ST176_single_line_reefing_Dec_2011.pdf| Fitting Barton Single line reefing from Sailing Today Dec 2011]]
  
 
[[Centaur Main Cabin Wall Cupboards]]
 
[[Centaur Main Cabin Wall Cupboards]]
Line 66: Line 109:
  
 
[[Removing the Propeller Shaft]]
 
[[Removing the Propeller Shaft]]
 +
 +
[[Removing a Centaur Water Tank]]
 +
 +
Presentation by Winston Waller to East Coast Group Winter Workshop 2013 about how he treated his Centaur hull [[http://www.westerly-owners.co.uk/documents/pptdocs/EpoxyTreatmentCentaurHull.ppt Epoxy Treatment of Centaur Hull]]
  
 
==References==
 
==References==
[http://www.westerly-owners.co.uk/westerlywiki/index.php?title=File:112808211-Westerly-Jouster.pdf Centaur Manual]
+
[[Media:112808408-Centaur-Manual.pdf | Centaur Manual]]
  
 
PBO Centaur Article PBO No 354 June 1996 (Available as a reprint)
 
PBO Centaur Article PBO No 354 June 1996 (Available as a reprint)
Line 75: Line 122:
  
 
[http://www.laurentgilesarchive.com/yacht-detail?id_no=589 Laurent Giles Archive - Plans for the Centaur]
 
[http://www.laurentgilesarchive.com/yacht-detail?id_no=589 Laurent Giles Archive - Plans for the Centaur]
 +
 +
[http://www.agentlemansyacht.com Roger Ball's complete rebuild of K319]
  
 
[[Main Page|Back to the Main Page]]
 
[[Main Page|Back to the Main Page]]

Revision as of 16:00, 3 January 2018

Introduction

First shown at the 1969 London Boat Show the Centaur production run reached 2,440 before the design was replaced by the Griffon in 1980. A variety of engines were origianally fitted with the 23HP Volvo MDIIB and MDIIC being the most popular.

Centaur Statistics

Designer: Laurent Giles CR 1871 Flora, a 1977 Centaur entering Queenborough in June 2011 on a WOA East Coast Group Meet
Keel: Twin
Cockpit: Aft
LOA (feet): 26' 0"
LWL (feet): 21' 4"
Beam (feet): 8' 5"
Draft (feet): 3' 0"
Centaur Keel Width: Width at leading edge 78",

Width at trailing edge 83",

Length 64"

Displacement (lb): 6,700
Ballast (lb): 2,800
Berths: layout A: 6; layout B: 5; layout C: 4
Heads: 1
Rig: Sloop/Ketch (probably < 20 Ketch)
Fuel (ltr): 45
Main (sq. feet): 161
No. 1 Genoa (sq. feet): 223
No 1 Jib (sq. feet): 133
Sail ID: CR
Water (ltr): 67
Built: 1969 - 1980
Number Built: 2444


Westerly Centaur Brochure here: Westerly Brochures


Thinking of buying a Centaur ? Find all you need to know here: Paul Shave's article Buying a Centaur


The Centaur Definitive Guide

(First published in WOA magazine No. 51, Winter 1993)

Dennis Rayner’s designs had launched Westerly as a successful company, but by 1967 it was felt that fresh ideas were needed for a new range for the 1970’s. Jack Giles of Laurent Giles had recently launched "Bluebird of Thorne", a 50 foot twin keeler, for which he had done extensive tank testings. The tank testings decided it; he was the man to approach for state of the art twin keel designs.

The first effort was a bit of a disaster, since Laurent Giles had come up with what amounted to a development of the existing Westerly 25, which David Sanders thought was "all curves and no substance." David Sanders was very disappointed and said so to Jack Giles who immediately perked up and said "so you want a proper yacht?"

At this stage I can do no better than to produce the words of Jack Giles from his press release of March 1969:

Westerly Centaur L.0.A.: 26ft. L.W.L.: 21ft. 4ins. Beam: 8ft. 5ins. Draft: 3ft. Working sail area: 341sq ft. T.M.: 6 tons Designers: Laurent Giles & Partners Ltd. Builders: Westerly Marine Constructions Ltd.


To be commissioned to design for Westerly Marine was indeed a challenge. With the resources of their own Research Department allied to a highly developed production line and a keen Buying Office there seemed to be a danger of too many outside pressures working on the Designers.

In practice we found that this was not so, providing trouble was taken to appreciate and allot priorities to the requirements of the various departments concerned and provided we were prepared to work within a reasonable, but tight, time table.

The first result of this co-operation, the "Centaur", has a very low waterline over beam coefficient, a clean canoe body and twin bilge keels of aero-foil section.

The power installation has its propeller working in clear water and the balanced skegiess spade rudder provides ample control under sail or power.

Under sail the boat performs remarkably well to windward at a very modest angle of heel and under power did all that was expected of her and, in addition, showed unusually good handling characteristics when going astern.

The layout below decks is spacious for a boat of only 26 ft, overall having four comfortable 6ft. 6in. berths, a separate toilet compartment and a dinette arrangement which can be converted into an additional double bunk. Despite the space below decks, there is still a 6ft. 6in. self-draining cockpit, a feature of the boat which has appealed to the American market to which an appreciable number of "Centaurs" have already been exported. 20.3.69

The Centaur was officially launched at the London Boat Show 1969, and was an immediate hit worldwide, as can be seen from the press release. She was, and is, the perfect family yacht for all the reasons that Jack Giles outlined, but also because she was reasonably priced, and thoroughly well made. On the subject of maintenance and value, it is particularly important to have a steady replacement programme for any yacht so that her equipment, such as sprayhood, sails and instrumentation, is not dreadfully out of date or simply "clapped out." On the other hand, it is important to guard against the thought that spending £2,500 on vertical roller reefing will add significantly to the boat’s value.

Maintenance, Repair and Upgrades

Fitting a Quick Genius 12v windlass to a Centaur

Centaur Sink

Fitting Barton Single line reefing from Sailing Today Dec 2011

Centaur Main Cabin Wall Cupboards

DIY cockpit seating teak substitute

Centaur Cutless Bearing Removal and Replacement

Removing the Propeller Shaft

Removing a Centaur Water Tank

Presentation by Winston Waller to East Coast Group Winter Workshop 2013 about how he treated his Centaur hull [Epoxy Treatment of Centaur Hull]

References

Centaur Manual

PBO Centaur Article PBO No 354 June 1996 (Available as a reprint)

PBO Centaur Ketch Article PBO No 403 July 2000 (Available as a reprint)

Laurent Giles Archive - Plans for the Centaur

Roger Ball's complete rebuild of K319

Back to the Main Page